Home / Gainesville / Mold season calendar

Gainesville Mold Season Calendar

Mold is a year-round problem in north Florida, but the risk is not even. Here is what to watch and do in each part of the year.

Green mold growing on a damp wall

Seasons

The Gainesville mold calendar

The risk changes with the season. This is what to watch and do in each stretch of the year. Rain figures are the National Weather Service’s monthly averages for Gainesville, 1971 to 2000.

WhenRain per monthWhat to do
December to March2.6 to 4.3 inchesCooler outside. Check windows for condensation, bathrooms and closets, and fix any leaks you found over the summer
April to May2.9 and 3.2 inchesBest window before the wet season. Have the AC drain line and air handler checked, inspect the roof, clear gutters
June to August6.1 to 6.8 inchesWettest months, and hurricane season starts June 1. Keep indoor humidity under 60 percent, ideally 30 to 50, per the EPA. Treat any leak as a 24 to 48 hour problem
September to October4.4 and 2.5 inchesHurricane season peaks in September. After any storm, photograph damage, dry everything and look for roof leaks and wet attic insulation
November2.2 inchesHurricane season ends November 30. Look for stains on ceilings and wall corners left by summer storms

More detail is on our Gainesville mold season calendar.

The targets

Numbers worth knowing

  • Keep indoor humidity under 60 percent, ideally between 30 and 50 percent, according to the EPA.
  • Dry wet materials within 24 to 48 hours. After that, mold can start growing.
  • Find and fix the source of the moisture first. Cleaning mold without fixing the water problem means it comes back.
  • Run the AC through the humid months and have the drain line checked in spring.

The rain figures above are the National Weather Service averages for 1971 to 2000. Recent years can run wetter or drier, so use them as a picture of the pattern, not a forecast.

After a storm, see the storm and flood history for what to do in the first 48 hours.

January to March

Winter and early spring

  • Condensation: cool nights can leave moisture on windows, exterior walls and cold pipes; wipe it and run fans
  • Heating: a house sealed tight with little ventilation can hold humidity; use bathroom and kitchen fans
  • Plan ahead: schedule AC service, inspect the attic and look at the roof before the rainy season
  • Check: closets on outside walls and spaces that stay closed through winter

April to May

Pre-season prep

  • Service the AC, clear the condensate drain and replace filters
  • Clean gutters and make sure downspouts carry water away
  • Seal gaps around windows, doors and penetrations
  • Check caulk and grout in bathrooms
  • Trim trees near the roof
  • Test your dehumidifier and hygrometer

EPA advises keeping indoor humidity between 30 and 50 percent. Start measuring before humidity climbs.

June to September

Peak risk: the wet season

Daily afternoon storms, high dew points and heavy AC use create the highest mold risk of the year. Common problems include clogged AC drains, sweating ducts, roof leaks, window leaks, closet mold and condensation on cold surfaces. If you travel, keep the AC on and ask someone to check the house. A vacant, warm, humid house can grow mold in a matter of days to weeks.

  • Check the AC closet and the drain pan monthly
  • Watch ceilings and walls after heavy storms
  • Keep furniture a few inches from exterior walls
  • Dry wet materials within 24 to 48 hours

June to November

Hurricane season

The Atlantic hurricane season runs from June 1 through November 30. Peak activity is typically late summer through early fall. Keep photos of your home, a supply kit and your insurance information ready. See the hurricane season checklist.

October to December

Fall and early winter

  • Inspect the roof and attic after storm season
  • Look for stains, soft spots or new smells
  • Service heating equipment and replace filters
  • Check for slow leaks that went unnoticed during summer
  • Review insurance coverage and renewals

The first cooler weeks can feel dry but indoor humidity may stay high. Keep measuring.

Any month

Always-on habits

  1. Fix leaks within a day or two
  2. Run bathroom fans during and after showers
  3. Keep humidity in the 30 to 50 percent range
  4. Do not leave wet laundry or towels piled up
  5. Photograph any new stain and watch whether it grows

For more on humidity, see indoor humidity and dehumidifiers.

Simple dashboard

What to measure

  • Indoor humidity with a hygrometer in the main living area and the bedroom
  • AC drain flow at the start of summer
  • Water stains after storms
  • Smell in closets and bathrooms
  • Energy bills that jump, which may point to AC problems

More questions

More questions, answered

What month is worst for mold in Gainesville

July through September are usually the highest-risk months because of heat, humidity and rain, but any month can see leaks.

Should I run a dehumidifier in winter

If your hygrometer reads above 50 percent, yes. Many homes need it less in winter.

What should I do before leaving for a long trip

Keep the AC running at a reasonable setting, shut off the water supply if recommended, and ask someone to check the house.

Is winter mold risk lower in Gainesville

Usually, but not zero. Condensation, leaks and closed-up houses can still cause mold in cooler months.

FAQ

Mold remediation in Gainesville: your questions

How long does mold remediation take?

It depends on the size of the job and how long the structure takes to dry. The written scope should give you a schedule.

My AC smells musty. Is it mold?

Possibly, but a smell alone doesn’t prove it. Check the drain pan, the condensate line and the area around the vents. The EPA says not to run an HVAC system you know or suspect has mold, so if you see growth in or near the unit, call the same day.

Will the mold come back?

Only if the moisture does. The EPA says that if you clean up mold but don’t fix the water problem, it will most likely return. Ask what the warranty covers and what voids it, and get it in writing.

Sources: U.S. EPA mold guidance, Florida Statutes sections 468.8419, 83.51 and 83.56, the Florida Department of Business and Professional Regulation, the Florida Department of Health, and National Weather Service records.

Get a quote

Get a written quote for your Gainesville mold problem

Send a few photos and a short description, and PureGuard Restoration will come back with a written scope of work and price. We will get back to you as soon as we can.

Ask for the license number when someone calls you back. You can check it on the state lookup.

About us: PureGuard Restoration is a mold remediation company serving Gainesville and Alachua County. We do not test for mold.

Request your written quote

What helps most in the first message

  • Where the mold is and roughly how big it looks. A coin, a hand or a sheet of paper next to it helps.
  • Where you think the water came from, and whether it’s fixed.
  • When you first noticed it, and whether there was a leak, storm or AC problem before that.
  • Whether you own, rent or manage the property, and whether you plan to involve insurance.